Technology

This Big Microscope 60x-100x, besides for identifying tiny insects, can be used for any other purposes by amateurs, collectors, electrical engineers or students. The microscope has:

• 60x, 80x or 100x magnification options
• focus adjustment
• illumination
• converting stand
• does not include batteries

The Dimlux Aux Box connects to the Dimlux Maxi Controller via the controller's aux port, thus turning it into a fully automatic air conditioning system . The Dimlux Aux Box has two connections - one for a heater or heater and one for a humidifier or dehumidifier . The control is electronic and there is no annoying buzzing.

Effectively control the climate in your grow room with TechGrow’s Clima Control Plus 7A - both day and night.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 7 Amp / 1700W
• Adjustment range TMP set: 0 - 50°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Adjustment range temperature offset: -5 to +5°C

Temperature, minimum speed and negative pressure controller.

Sizes and technical data:

• Controller: W80xH80xL130mm
• Case: W150xH110xL170mm
• Designed for: 2A / 2x200W / TRIAC 2x16A
• Voltage: 230V / 50HZ
• Digital sensor 5V measures temperatures from –55°C to +125°C ( –67°F to +257°F )
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

Settings range:

• Temperature: 20C° to 30C°
• Minimum speed: off, 20% to 100%
• Negative pressure: 100% to 50%

TechGrow - Clima Micro Day / Night Fan Controller 5A is a controller that regulates the speed of your fan in two operating modes - day and night. You can easily set the desired speed with the rotary knobs, as well as a delay time of 0 to 10 minutes. The controller does not connect to a sensor and does not measure CO2, temperature or humidity!

• Very easy to use
• Adjustable fan speed for day and night mode
• Adjustable delay time up to 10 minutes
• Built-in light sensor

The Day/Night Fan Controller 7A is the easiest to use climate control device by TechGrow for your indoor garden. The controller is very efficient and fully 'plug & play' (just connect it to the mains and turn it on). To adjust the day and night speeds of your fan, you can use the two rotary knobs, and the settings will switch automatically thanks to the built-in light sensor.

key functions:

• controls: fan speed
• display: no
• day/night detection: yes
• light sensor: yes, built-in
• thermal relay: no
• temperature alarm: no

power supply:

• input: 100 - 220V
• consumption: 3W
• fuse: 8A
• triac: 12A
• power cable: 3 x 0.75 / 1.7m

Note: no connection for sensors available!

Controlling the climate in your grow room with the TechGrow Clima Control Basic Plus 14A is simple but effective.

• Power supply: 100 to 240V
• Net frequency: 50 to 60Hz
• Consumption: 3W (excluding fan)
• Maximum capacity fan: 14 Amp / 3400W
• Adjustment range ТМР set: 10 - 45°C
• Adjustment range ТМР hyst +/-: 1 -7°C
• Probe: comes with a pre-mounted temperature probe on a 4.5m (15ft) cable

Controlling the climate in your grow room with the TechGrow Clima Control Basic Plus 7A is simple but effective.

• Power supply: 100 to 240V
• Net frequency: 50 to 60Hz
• Consumption: 3W (excluding fan)
• Maximum capacity fan: 7 Amp / 1700W
• Adjustment range ТМР set: 10 - 45°C
• Adjustment range ТМР hyst +/-: 1 -7°C
• Probe: comes with a pre-mounted temperature probe on a 4.5m (15ft) cable

The Bluelab Connect Stick is a USB flash drive that allows recording of nutrient solution measurements and wireless monitoring.

• Ability to record data taken [when used with Bluelab Connect products (sold separately)]
• Download and install Bluelab Connect software for FREE
• Monitor data and its current status via Google Docs (requires a computer with constant internet access)
• 2 years warranty

Control the climate in your grow room effectively with TechGrow’s Clima Control 14A.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 14 Amp / 3400W
• Adjustment range TMP: 10 - 50°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Adjustment range TMP offset: -5 to + 5°C 

The Day/Night Fan Controller 14A is the easiest to use climate control device by TechGrow for your indoor garden. The controller is very efficient and fully 'plug & play' (just connect it to the mains and turn it on). To adjust the day and night speeds of your fan, you can use the two rotary knobs, and the settings will switch automatically thanks to the built-in light sensor.

key functions:

• controls: fan speed
• display: no
• day/night detection: yes
• light sensor: yes, built-in
• thermal relay: no
• temperature alarm: no

power supply:

• input: 100 - 220V
• consumption: 3W
• fuse: 15A
• triac: 24A
• power cable: 3 x 1.5 / 1.7m

Note: no connection for sensors available!

A step-up transformer that allows you to drive fans without the low-frequency sound at low speed.

The six stages of control help to better control the output fan according to the temperature settings you have set.

Two buttons allow setting temperature and temperature hysteresis.
Through the built-in jumper - J1 (in the box) you can choose whether, when the desired temperature is reached, the fan continues to work at minimum speed or stops. When J1 is closed - ventilation continues to work at minimum speed. When open - stops the fan completely.

It is equipped with a 4m cable with a temperature and humidity sensor, an output fan contact and a waterproof case.

- temperature range: 20C° - 30C°
- temperature hysteresis: 2C°-8C°
- size: 265mm x 300mm x 205mm
- max. Power: 2.5A
- Voltage: 230V / 50HZ
- 5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
- Accuracy: 0.5C° in an interval from -10C° to +85C°; ±4.5%rh
- Degree of protection: IP54

Plant temperature is more important than ambient temperature! When the camera is connected, the climate can be controlled based on the temperature of the plant. If the temperature of the plant gets too high, the Dimlux Maxi Controller will dim the lights to keep the stomata open. In the event of a water shortage (e.g. due to a faulty pump) the lights are also dimmed or switched off to prevent crop damage.

• infrared heat detection camera
• extremely precise environmental control
• allows the Dimlux Maxi Controller to calculate VPD*
• used by the professional horticulture industry
• very easy to install – plugs right into the Dimlux Maxi Controller
• 10m cable

*Note: see what Vapor Pressure Deficiency (VPD) is in the detailed description.

A step-up transformer that allows you to drive fans without the low-frequency sound at low speed.

The six stages of control help to better control the exhaust fan according to the temperature and humidity settings you have set.

The four buttons allow setting temperature, temperature hysteresis, humidity and humidity hysteresis.
Through the built-in jumper - J1 (in the box) you can choose whether, when the desired temperature and humidity are reached, the fan continues to work at minimum speed or stops. When J1 is closed – ventilation continues to operate at minimum speed. When open - stops the fan completely.

It is equipped with a 4m cable with a temperature and humidity sensor, an output fan contact and a waterproof case.

- temperature range: 20C° - 30C°
- temperature hysteresis: 2C°-8C°
- humidity range: 30% - 100%
- humidity hysteresis: 6%-30%
- size: 265mm x 300mm x 205mm
- max. Power: 2.5A
- Voltage: 230V / 50HZ
- 5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
- Accuracy: 0.5C° in an interval from -10C° to +85C°; ±4.5%rh
- Degree of protection: IP54

Forget about switchboard, timer-box and relays! Dimlux lighting fixtures can be plugged directly into the outlet ! Just set the on and off times and your lighting is ready to go!

Dimlux Maxi Controller is a modular system for controlling Dimlux lighting , fan and heating . It can control up to 160 Dimlux luminaires or ballasts. You can set the desired brightness using the + and - buttons. The Maxi controller controls and monitors CO ₂ , plant temperature and vapor pressure deficit ( VPD ) depending on the selected connected sensors. Why choose Dimlux Maxi Controller?

1. Gradual to continuous variable dimming.
2. Create optimal conditions for growing your crop.
3. Advanced connectivity and control capabilities.
4. Simulates sunrise and sunset .
5. Datalog function (permanent recording of measured data)

Introducing Silent Fan 300mm - the perfect tool to ensure optimal ventilation without unwanted noise. Built with innovative technologies, this fan offers efficiency and reliability in a stylish and compact design.

The Bluelab PeriPod M3 allows for automated maintenance of ideal pH and nutrient levels in your tank!

• 1x 120ml/min peristaltic pump for dosing pH adjustment solutions
• 2x 120ml/min peristaltic pumps for nutrient dosing
• robust housing and wall mounting option
• individual pump filling and calibration
• replaceable peristaltic pumps and tubes
• 4 m. alkali-resistant tubes for dosing pH regulator
• 2x 4m. tubes for nutrient solution dosing
• compatible with most modern growing systems, including recirculating and standard drain systems
• compatible with Bluelab Pro Controller

* Please note: Only M-series pumps (M3 and M4) can be connected together. L3 can only be connected to other L3s.

Hager Power Panel 48x600w, 8x continu en 3x kachel/heater

The OptiClimate 3500 PRO3 is a water-cooled air conditioner that cools the air using water and heats it using ceramic heaters. It is an independent climate system that perfectly controls the indoor climate , consuming as little energy as possible. OptiClimate has an inlet and outlet for water. The entrance is connected to the water supply. The cold water is used to cool the air, causing the water temperature to rise from 35°C to 50°C. This hot water is then channeled through the water outlet or recycled.

• functions for: cooling , heating , air drying (dehumidifier), circulation and air filtration .
• current consumption 230V: 740W
• cooling capacity: 3.5kW (for 6 x 600 HPS)
• dehumidifies: 55l (for 24h)
• water consumption: 1-2 l/min
• 2 x 1500W ceramic heaters
• flange diameter: ⌀ 250mm (1pc included)
• dimensions: 100 x 50 x 42cm
• weight: 57 kg
• warranty: 1 year

The Dimlux temperature sensor allows the Dimlux Maxi Controller to dim the lights based on the ambient temperature in the grow room. If the set value is exceeded, the lights will dim to keep the temperature under control. If the temperature remains elevated despite dimming, half of the dimmed lights will be turned off in a checkerboard pattern. If the temperature continues to rise, all lights will be turned off for at least 20 minutes .

• measures the temperature levels in the room
• precise and professional equipment
• 10m cable

LUMii Cord Set with 4m Cord

The LUMii® Reflector Cord Set is 4m long to IEC and can be used on it's own to hang lamps or used with LUMii® shades. If using on it's own we recommend the use of the hanging bracket which is designed to take stress off the cable. Cord Set is ideal for lamps up to 600w.

4m Cord (0.75mm Cord) E40 Lamp socket,

use with addtitional LUMII hanging bracket also available for easy vertical hanging via rope ratchets

LUMATEK 100W 240V CONTROLLABLE BALLAST is a digital ballast that can work with both sodium (HPS) and metal halide (MH) lamps. It provides a stable and precise voltage to the lamp, creating a higher PAR/PPF emission and yet is much more energy efficient than most ballasts on the market! The ballast features "smart start" technology and a soft dimming mechanism! External control is possible with LUMATEK Control Panel Plus 2.0 (sold separately).

• output power: 1000W
• dimmable / 4 working modes: 600W - 750W - 1000W - 1000W SL
• generates very little heat compared to other ballasts on the market
• silent work
• Protections: full circuit protection - open / short; over temperature; over / low voltage; end of lamp life / rectification
• 5 years warranty!

LUMATEK 600W 240V CONTROLLABLE BALLAST is a digital ballast that can work with both sodium (HPS) and metal halide (MH) lamps. It provides a stable and precise voltage to the lamp, creating a higher PAR/PPF emission and yet is much more energy efficient than most ballasts on the market! The ballast features "smart start" technology and a soft dimming mechanism! External control is possible with LUMATEK Control Panel Plus 2.0 (sold separately).

• output power: 600W
• dimmable / 4 working modes: 250W - 400W - 600W - 660W
• generates very little heat compared to other ballasts on the market
• silent work
• Protections: full circuit protection - open / short; over temperature; over / low voltage; end of lamp life / rectification
• 5 years warranty!

• 600W lamp/bulb modes: 250W, 400W, 600W
• 400W lamp/bulb modes: 250W, 400W, don't dim over 400W!
• 250W lamp/bulb modes: 250W, don't dim over 250W!
• Power Lead: 2m
• Voltage: 240V
• Running Amps: 2.9A
• ​Dimensions L/W/H: 43/38/18.5cm
• Weight: 3.215kg

Maxibright Warpdrive 600W Power Pack is a budget electronic ballast designed to work with high pressure sodium (HPS) and metal-halide (MH) lamps / bulbs. It is not dimmable!

• silent running
• compact and lightweight
• runs HPS and MH lamps

Note: the product is equipped with a UK plug* and IEC-14 female plug*!

Agrolite Magnetic Ballast CL2 CMH 315W is a lighting set designed to work with CMH / CDM lamps of the latest generation (ceramic metal-halogen / metal-halogen lamps with ceramic discharge).

• the set consists of: magnetic ballast, ignitor and capacitor
• cable to the mains: 1.5m
• cable to the lamp with C13 plug: 0.2m
• for CMH / CDM lamps
• power: 315W
• current consumption: 3.64A
• voltage: 220/230V
• dimensions L/W/H: 298x128x115mm
• weight: 6.2kg

Electrostart 1000W is a lighting set designed to work with HPS (high pressure sodium) and MH (metal-halide) lamps.

• the set consists of: magnetic ballast, ignitor and capacitor
• for HPS and MH lamps
• power: 1000W
• current consumption: 10.3A
• voltage: 230V, 50Hz
• dimensions L/W/H: 25 x 17 x 9cm
• weight: 12.0kg

Electrostart 600W is a lighting set designed to work with HPS (high pressure sodium) and MH (metal-halide) lamps.

• the set consists of: magnetic ballast, ignitor and capacitor
• for HPS and MH lamps
• power: 600W
• current consumption: 6.2A
• voltage: 230V, 50Hz
• dimensions L/W/H: 24 x 14 x 9cm
• weight: 7.5kg

HortiLight Ballast 600W is an excellent addition to any grow room for those looking for high quality and reliable magnetic ballast at a reasonable price. It is designed to work with HPS (high pressure sodium) and MH (metal-halide) lamps.

• for HPS and MH lamps
• power: 600W
• current consumption: 3A
• voltage: 220 / 240V, 50Hz
• dimensions L/W/H: 310x144x120mm
• weight: 6.4kg

Mari 600W is a high quality and long lasting product - one of the best and most selling on the market in its class. The lighting set is designed to work with HPS (sodium) and MH (metal halide) lamps.

• the set consist of: magnetic ballast, ignitor and capacitor
• for HPS and MH lamps
• power: 600W
• current consumption: 6.2A
• voltage: 230V, 50Hz
• dimensions L/W/H: 295x110x115mm
• weight: 6.4kg

Electro-Magnetic hybrid control for 600W sodium (HPS) or metal-halide (MH) lamps/bulbs. It consists of a throttle, a starter ("lighter"), a capacitor and a control circuit.

• power: 600W
• power consumption: 660W
• 230V, 50Hz
• λ> 0.9; starting voltage 3.2KV
• protection class IP 20
• Dimensions L/W/H: 290x100x80mm
• weight: 6.4kg
• Warranty: 1 year

This cable is designed to transmit the signal between the Lumatek controllable ballasts and the digital controller

HortiLight PWM LED Controller is an intelligent controller for controlling LED lighting fixtures with PWM (Pulse Width Modulation) control. It allows precise adjustment of light output, automatic programming of light modes and remote control, making it an excellent solution for professional and amateur plant growing systems. It is compatible with LED drivers Mean Well, Inventronics, Osram, Sosen and others that support PWM control.

The Faran Analogue Hygrostat is a reliable analog controller for automatic humidity control in grow rooms, greenhouses, nurseries and other climate-controlled spaces. The device monitors the relative humidity of the air and automatically turns the humidifier on or off to maintain the set level, without the need for complex settings or an internet connection.

? GSE Timer Box IV is a professional lighting and heating controller designed for hydroponic and greenhouse systems. It allows simultaneous control of up to 4 600W lamps and switching on heating devices with a maximum power of up to 2300W when the lighting is off. With a built-in temperature sensor and the ability to dim the lamps, this controller provides optimal conditions for plant growth.

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Timer box 4h16A applying a voltage relays for ballasts 12x600W or 12x400W Sizes and technical data: Case: WxHxD = 180x130x60mm Timer box: WxHxD = 230x150x70mm 1 Pole incl. connector 16A (EU) 4x600W 1 Pole incl. connector 10A (CH) 3x600W, 3 Pole excl. connector 9x600W Volt: 230V / 50Hz 24h timer with 36h power reserve 30min. setting Relays: 4x16A 230V Protection class: IP40

Timer box 4h16A applying a voltage relays for ballasts 12x600W or 12x400W.V time off powered by 2000W heater. Case: WxHxD = 180x130x60mm Timer box: WxHxD = 230x150x70mm 1 Pole incl. connector 16A (EU) 4x600W 1 Pole incl. connector 10A (CH) 3x600W, 3 Pole excl. connector 9x600W Volt: 230V / 50Hz 24h timer with 36h power reserve 30min. setting Relays: 4x16A 230V Protection class: IP40

The Lighthouse wireless thermostat is ideal for most heating appliances. This includes infrared heaters , tube heaters , " blower " stoves, underfloor heating and mobile radiators , as well as various types of cooling appliances .

• Plug and Play ( just connect it to the power grid and turn it on , no installation required )
• automatic wireless connection between the movable thermostat and the switch
• possibility to choose a " heating " or " cooling " function, depending on the preferred device for use
• built-in temperature sensor
• multi-channel - one movable thermostat can control several switches
• removable design suitable for placement or wall mounting
• shows current and desired temperature in degrees ºC or ºF
• LCD backlight with battery life-saving automatic shutdown
• low battery warning

The controller maintains a constant set temperature and prevents operation below the specified minimum speed, as well as operation above the permitted maximum speed.

This LCD fan controller with built-in display and rotary knob provides very quick and easy setup and reading of all the information provided by the intake and exhaust fan controller. It displays the temperature, humidity and rpm speed of the EC suction fan. A built-in light sensor detects day/night modes. Two 5A / 230V AC outputs for supply and exhaust fan, meanwhile you also have two RJ45 EC outputs and you can choose between 0-10V or PWM signal (pulse duration modulation).

Setting range:

• Temperature: 15 - 35C° , Hysteresis 1 to 5C°
• Humidity: 0 - 100% , Hysteresis 1 to 20%
• Min. speed: off , 1 to 100%
• Max. speed: 10 to 100%
• Neg. pressure: 0 to 50%

TechGrow - Clima Eco 5A (Minimum speed) controls the minimum fan speed until the desired temperature in the growroom is reached or maintained. This budget controller is easy to operate with - there are only two rotary knobs - to set the minimum fan speed and the desired room temperature.

• Controls the minimum fan speed until the desired temperature is reached or maintained
• Minimum fan speed setting range: 10% - 100%
• Temperature setting range: 15° - 35°C
• Hysteresis: 2°C
• Minimum required sensor: TempProbe (not included)

The Humi Heavy is specially designed for controlling powerful dehumidifiers. Thanks to the extra heavy components, this controller can switch devices up to 10А.

• Power supply: 100 to 240V
• Mains frequency: 50 to 60Hz
• Own Consumption: 3W
• Switching capacity: 2300W / 10A
• Setting range RH set: 10 – 90% R.H.
• Setting range RH +/-: 0 – 5% air humidity

TechGrow - Clima Micro Plus 5A (Min speed) controls the minimum fan speed until the desired temperature in the growroom is reached or maintained. This efficient controller is easy to operate - there are only two rotary knobs - to set the minimum fan speed and the desired room temperature. There is also an option to adjust the hysteresis (1°C - 5°C).

• Controls the minimum fan speed until the desired temperature is reached or maintained
• The display shows the current temperature as well as the set temperature, fan speed, minimum and maximum measured temperature and hysteresis
• The LED indicates a stable climate or high temperature
• Minimum fan speed setting range: 10% - 100%
• Temperature setting range: 15°C - 35°C
• Hysteresis setting range: 1°C - 5°C
• Minimum required sensor: TempProbe (not included)

Control the climate in your grow room effectively with TechGrow’s Clima Control 7A.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 7 Amp / 1700W
• Adjustment range ТМР: 10 - 50°C
• Adjustment range ТМР hyst +/-: 0 - 5°C
• Adjustment range temperature offset: -5 to + 5°C 

TechGrow T-2 Pro CO₂ Controller7A is an unparalleled device that controls the CO₂ value, temperature and humidity in your growing area.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without CO₂ source)
• Maximum power fan: 7 Amp / 1700W
• Adjustment range CO₂ set: 300 to 2000ppm
• Adjustment range CO₂ +/-: 20 to 200ppm (advice 50ppm)
• Adjustment range RH set: 10% - 90% RH 
• Adjustment range RH +/-: 0% - 10% RH 
• Adjustment range TMP set: 0 - 45°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Measurement interval: 1 measurement per second

Note: the sensor is sold separately!

TechGrow T-2 Pro CO₂ Controller 14A is an unparalleled device that controls the CO₂ value, temperature and humidity in your growing area.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without CO₂ source)
• Maximum power fan: 14 Amp / 3400W
• Maximum power CO₂ source: 6A / 1500W
• Maximum total power: 16A
• Adjustment range CO₂ set: 300 to 2000ppm
• Adjustment range CO₂ +/-: 20 to 200ppm (advice 50ppm)
• Adjustment range RH set: 10% - 90% RH 
• Adjustment range RH +/-: 0% - 10% RH 
• Adjustment range TMP set: 0 - 45°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Measurement interval: 1 measurement per second

Note: the sensor is sold separately!

Sound-isolated box fan.

• Capacity: 4250m³/h
• Power: 550w
• Amperage: 6A
• Voltage: 230V AC, 50Hz
• Size: 55cm X 55cm X 57cm

Electric duct heater with temperature regulator or control unit.

VENTS TT Silent-M 250 1400m³/h is a turbine fan with a specially designed sound-insulated housing that ensures silent operation with high aerodynamic characteristics. The fans from the Silent-M series are very suitable for use in the ventilation systems of various commercial and industrial premises with high requirements to noise level - libraries, conference halls, educational institutions, kindergartens, etc.

• specially designed outer casing made of polymer-coated steel
• the inner casing is covered with a 5mm layer of special heat- and sound-insulating wool
• the inner casing and the propeller are made of high quality durable plastic
• powerful air stream and high pressure
• single-phase double-speed motor with low energy consumption
• motor equipped with ball bearings for a long service life designed for at least 40 000 operating hours

HE402 is a professional humidifier for installation in ventilation systems, designed to maintain optimal humidity in greenhouses, greenhouses and other climate-controlled spaces. With the right water pressure, it provides a capacity of up to 10 liters per hour and is suitable for systems with an air flow of 600–700 m³ . It works without fine mist in the room, humidifying the air effectively through evaporation.

TechGrow Clima Control ECO 8A can control up to 2 fans and precisely creates the desired climate in your indoor garden. It accelerates more slowly than other controllers to achieve a more stable climate. With the rotary knobs, you can easily set the desired temperature and hysteresis, as well as the minimum and maximum fan speed.

key functions:

• controls and displays: temperature
• day/night detection: no
• light sensor: no
• heater relay: no
• temperature alarm: no

software functions:

• temp. range: 10 - 45°C
• temp. hysteresis: 0 - 7°C
• temp. settings: day
• humidity settings: no
• day/night delay: no
• min. max. values: no

power supply

• power supply: 100 - 240V
• consumption: 3W
• fuse: 8A
• max. load: 1700W
• power cable: 3 x 1.5 / 1.7m