Home 
New products 
Promotions 
Contact Us 
Promotion
Greenhouses
Seeds
Grow tents
Grow Lights
Ventilation and Climate
Roothold and growing media
Soil and Pots
Nutrients and Supplements
Hydroponics and Irrigation systems
Timers and Controllers
Measuring devices
Scissors and Trimmers
Machines and Devices
Aaccessories
Presents
Faran Analog Hygrostat - Humidity Controller
The Faran Analogue Hygrostat is a reliable analog controller for automatic humidity control in grow rooms, greenhouses, nurseries and other climate-controlled spaces. The device monitors the relative humidity of the air and automatically turns the humidifier on or off to maintain the set level, without the need for complex settings or an internet connection.
-
Code:17075
-
Weight:2.000 Kgs
Quick Buy
Faran Analogue Hygrostat is a practical solution for automatically maintaining optimal humidity in plant rooms. Instead of constantly manually monitoring and turning on the humidifier, the device monitors the relative humidity and controls the operation of the connected humidifier according to the preset value.
Thanks to the analog regulator , setup is quick and intuitive. No apps, Wi-Fi connection or digital programming required – simply set the desired humidity level via the rotary potentiometer and the hygrostat automatically takes care of the rest.
The device is designed to work with humidifiers such as Faran HR15 , Faran HR50 and other standard humidifiers that are controlled by turning the power on and off. When the set humidity is reached, the hygrostat cuts off the power to the humidifier, and when it drops below the set value, it turns it on again.
For best results, the manufacturer recommends mounting at canopy height and away from the direct stream of the humidifier to avoid inaccurate measurements.
Technical characteristics
✔️ Manufacturer: Faran
✔️ Type: Analog humidistat
✔️ Function: Automatic humidity control
✔️ Operating range: 10% – 80% RH
✔️ Control method: ON/OFF
✔️ Accuracy: ±5% RH
✔️ Hysteresis: approximately 3% RH
✔️ Sensor: Nylon Loop
✔️ Power supply: 220V AC / 50Hz
✔️ Maximum switching current: 2.2 A
✔️ Power cable length: 2 m
✔️ Dimensions: 140 × 95 × 45 mm
✔️ Operating temperature: 10°C – 40°C .
📦 The set includes
✔️ 1 × Faran Analogue Hygrostat
✔️ Power cable
✔️ User manual.
📋 Method of use
- Mount the humidifier on a wall at plant level.
- Avoid installation directly next to the humidifier or directly in the water mist stream.
- Connect the humidifier to the hygrometer.
- Set the desired relative humidity using the rotary control.
- Let the system run for a few hours and check the humidity with a thermo-hygrometer.
- If necessary, make fine adjustments to the setting until the desired level is reached.
⚠️ Important: For the most accurate measurements, place the hygrometer away from the direct stream of the humidifier, heating appliances and ventilation openings. This ensures a real measurement of the humidity in the plant area and more precise climate control.
